Filter
Top Products
21
J4390pr-0922
IMPORTANT! To avoid damaging the motors and gears, stop the
vehicle before shifting from forward
to reverse
R
.
• Once your child is completely comfortable with operating the
vehicle in the forward mode, introduce reverse
R
.
• Make sure the shifter is in the reverse
R
position.
• Press down on the foot pedal.The vehicle will go in reverse at
a maximum of 2
1
/2 mph (4 km/h). The vehicle is designed to
operate in low speed only in reverse. Help your child practice
steering to learn how far and how quickly to turn the steering
wheel when driving in reverse.
VEHICLE OPERATION
• Your vehicle has a patented, electronic braking system that
automatically stops the vehicle when your child’s foot lifts from
the pedal. Make sure your child is comfortable with steering the
vehicle and automatically knows how to stop.
IMPORTANT! Use this vehicle ONLY outdoors. Most interior
floor-ing can be damaged by riding this vehicle indoors.
Fisher-Price
®
will not be responsible for damage to the
floor if the vehicle is used indoors.
To Back Up
• Make sure the shifter is in the low speed
position.
• Press down on the foot pedal. The vehicle goes forward at
a maximum of 2
1
/2 mph (4 km/h). Help your child practice
steering to learn how far and how quickly to turn the steering
wheel when driving forward in low speed.
Beginner Use - Low Speed Drive
• Make sure the shifter is in the high speed
position.
• Press down on the foot pedal. The vehicle goes forward at
a maximum of 5 mph (8 km/h). Help your child practice
steering to learn how far and how quickly to turn the steering
wheel when driving forward in high speed.
Advanced Use - High Speed Drive
• Before you disconnect the high speed lock-out, make sure
your child knows how to steer, how to start and stop the
vehicle and knows the rules for safe driving. When the high
speed lock-out is disconnected, the vehicle can be driven
forward in low speed (2
1
/2 mph / 4 km/h maximum) or high
speed (5 mph / 8 km/h maximum).
• Make sure the shifter is in the low speed position.
• Loosen and remove the screw in the shifter box.
• Place the lock-out screw into the hole in the top of the engine
for future use. It can be re-inserted into the shifter box to
lock-out high speed.
Remove
lock-out screw
for high speed.
Place
lock-out screw
here for storage.
As assembled, your vehicle is ready to roll in low speed (2
1
/2 mph, maximum). After your child has mastered the basic skills of driving
and understands the rules for safe driving, it’s time to remove the high speed lock-out screw to allow the vehicle to operate in low or
high speed. See the instructions on this page to remove the high speed lock-out screw.
STOP