Filter
Top Products
Assembly
• Position the base so the bottom is
facing you.
• Align the hole in a post with the
matching peg on the bottom of
the base, as shown.
• Insert a screw through the post
and into the peg. Tighten the
screw with a Phillips screwdriver.
Do not over-tighten.
• Repeat this procedure to attach the
other post.
• Set the base upright.
• Align the hole in the post with the
matching peg on the bottom of the
waterfall, as shown.
• Insert a screw through the post
and into the peg. Tighten the
screw with a Phillips screwdriver.
Do not over-tighten.
1
2
• “Snap” the tree into the base.
3
Bottom View