• Push the bubble mower so that all
four wheels contact the ground.
• Bubbles begin flowing after the
mower has been pushed about
15-20 walking steps. As long as the
mower is being pushed, bubbles
continue to flow.
• When bubbles stop, press down
on the bubble bottle again for 15
seconds to refill.
4
Bubblin’ Fun
• If your mower still does not make
bubbles:
- Check to be sure there is enough
bubble solution in the mower.
- Make sure all four wheels contact
the ground when pushing the
mower.
- Empty bubble solution from the
mower. Wash the bubble chamber
and filler opening. Refill with fresh
bubble solution (see page 5).
Note: We do not recommend the
use of silicones or oily lubricants
on this toy. As with any bubble
producing toy, when even a very
small amount of silicone or oily
lubricants are put into or used near
the bubble chambers, bubbles will
not form.