Filter
Top Products
Build a Zig-Zag Wall
• Fit a connector into each base.
• Turn the connector so that the grooves in the connector match
the slots in the base.
1
1
1
3
• Slide the plain wall into the groove in the connector, as shown.
• Push the plain wall down to secure in place.
Base
Plain Wall
7
1
2
• Position the bases on a flat surface, as shown.
• With the handle to the right, slide the sounds and lights wall into
the grooves in the connectors, as shown.
• Push the sounds and lights wall down to secure in place.
Sound and Lights Wall
Handle
Connector
Slot
Groove