Filter
Top Products
16
ASSEMBLY
F
H0440pr-0920
26
• Insert a #8-32 x
3
/
4
"
screw through the hole in the end of the
steering column.
• Attach a #8-32 lock nut (rounded side out) on the end of the screw.
• While holding the lock nut with the open end of the assembly tool,
tighten the screw with a Phillips screwdriver.
• Turn the vehicle upright.
Assembly
Tool
27
• While supporting the steering column in place, fit the steering wheel
onto the end of the steering column.
Hint: You may need the help of another adult to hold the steering
column in place while you attach the steering wheel.
Steering Wheel
Steering
Column
28
• Insert a #6 x 1
1
/2
"
screw into the hole in the base of the steering
wheel. Tighten the screw.
DASH VIEW
29
• Insert and "snap" the key assembly into the slot in the dash.
Key
Assembly
BACK VIEW