Filter
Top Products
IMPORTANT! Before assembly,inspect this product for
damaged hardware, loose joints, missing parts or sharp
edges.DO NOT use if any parts are missing or broken.
Contact Mattel for replacement parts and instructions
if needed.Never substitute parts.
This package contains small parts
in its unassembled state.
Adult assembly is required.
CAUTION
•Position each side rail so that the button faces outward.
•Fit the cross brace between the side rails,as shown.
•Push the cross brace down to“snap” it into place.This may
require a lot of force.
Side Rails
1
• Insert a screw through the hole in the bottom of each side
rail and into the cross brace.Tighten the screws with a
Phillips screwdriver.Do not over-tighten.
3
2
Shown Actual Size
#8 x 1.9 cm (
3
/4") Screw
Cross Brace
Button
Side
Rails
Push
Cross
Brace
• Insert the seat back tube into the socket in each side rail.
•While pressing the tabs on the ends of the seat back tube,
continue to insert the seat back tube into the sockets in
each side rail, until the tabs “snap” into place. Make sure
you hear a “snap” on each side.
•Pull the seat back tube up to be sure it is secure in the
side rail sockets.
3
Seat Back Tube
Press Tabs
Side Rail
Sockets
Push
Assembly