Filter
Top Products
Ready for Takeoff!
Turn the selector dial to choose the sounds
of a jet, a propeller plane or a helicopter.
Press to “snap” the plane to the arm.
Hint: Additional GeoTrax™ planes also work
with the airport (sold separately and subject
to availability).
• Locate the On/Off switch on the bottom of
the tower base.
• Slide the switch to the position to turn
the toy on and to the position to turn
it off.
Use the crane to pick up and load cargo.
Assembly
Fit the peg on one side of the cargo
tray into the hole in the tower base.
Press and “snap” the peg on the
opposite side of the tray into the other
hole in the base.
Assembly is now complete!
1
“Snap” the flags into the tower,
as shown.
4
“Snap” the arm into the top of the
control tower.
3
“Snap” the control tower into the
tower base.
2
“Snap” the controller base into the
tower base, as shown.
5
7
“Snap” the handle on to the post on
the controller base.
6
If you haven’t used the toy for a few minutes it goes to sleep.
To “wake up” the control tower, press the reset button near the
bottom of the tower.
The crane, windsock and sign have a small
tab that fits into a matching notch in the
runway, the tower base or any track piece.
For storage, press the buttons on the sides
of the controller base and pull to remove.
On/Off Switch
• Pull back on the
controller handle
to raise the air-
plane with realistic sound effects and
flashing lights. The more you pull back,
the higher the plane flies.
•Push the handle forward to lower and
land the plane.
Rotate the luggage carousel to get cargo
from the train to the plane.
1
3
2
4
PRESS
PRESS
Fit the long and short runways onto
the controller base, as shown.
Hint: The two runway pieces can be
removed for storage.