Filter
Top Products
Assembly
6
• Insert four M4 screws into the seat tubes and tighten.
•Rotate the seat tubes down.
Seat
Tubes
10
Bracket
Seat Tubes
11
•Position the bracket so that the tall end is toward the
bottom edge of the seat.
Hint: The M4 lock nuts have been assembled to the bracket at
the factory.During shipment of this product, they may have
fallen out.Check to be sure there is a lock nut in each hexagonal
opening on the bracket.If one (or more) has fallen out, fit the lock
nut into a hexagonal opening in the bracket.Make sure the
rounded side of the lock nut is facing up.
•Fit the grooves on the bracket to the seat tubes, as shown.
Seat
Tubes
Bracket
Grooves
Tall
End
Bottom
Edge of
Seat
9
M4 Screw - 4
Shown Actual Size
Lock Nut
Hexagonal
Opening
Shown Actual Size
M4 Lock Nut
Rounded Side
•Fit the seat wire through the slot in the bracket as shown.
Bracket
Slot
Seat Wire
12