Filter
Top Products
Testing Reception (for Vibrations)
5
Set channel switch on transmitter
to the same channel as receiver.
Place transmitter in room in which
you intend to use it.Rotate trans-
mitter power switch to turn
power on.Power indicator lights.
Turn on a radio.
Power
Indicator
Power
Switch
Clip receiver to your clothing (where
you will feel vibrations).Walk to
the furthest point of use. Rotate
power/volume dial to turn power
on.Power indicator lights.Now, press
the vibrations button.Vibrations
ready indicator lights.
• When sound is received,vibrations
begin and variable light display
lights on receiver.
• To turn off vibrations, press
vibrations button.Vibrations
ready indicator turns off.
• If you experience interference
(vibration) when it is obvious
that no sound is transmitting
while using one channel setting,
switch both units to other channel.
Selecting a channel is usually a
one time adjustment.
Test transmitter transmission and receiver reception
each time you change location of use.
Hint: You can also place the
receiver in your pocket.
Vibrations
Button
Vibrations
Ready
Indicator
Power
Indicator
Power/Volume
Dial
Adjust
Channel
Vibrations Button
Adjust
Channel