Filter
Top Products
Assembly
3
• Position the base so the bottom is facing you.
• Slide the two larger feet into the grooves in the base, as
shown. Be sure you do not pinch the mat when you
attach the feet.
• Slide the two smaller feet into the grooves in the base,
as shown.
• Insert a screw into each of the four feet. Tighten the screws.
• Fit the four grommets on the mat onto the pegs on the
larger feet, as shown.
• Insert a screw through each of the four grommets and into
the pegs. Tighten the screws.
• “Snap” the keyboard on the base.
• Pull up on the keyboard to be sure it is secure.
• “Snap” the horns, monkey and guitar to the base, as shown.
Assembly is now complete.
2
1
3
4
5
Foot (Larger)
Foot (Larger)
Feet (Smaller)
Base with Mat
#8 x
1
/2" Screw
Keyboard
Horns
Guitar
Monkey
This product contains small parts
in its unassembled state.
Adult assembly is required.
CAUTION
#8 x
1
/
2" Screw