Filter
Top Products
7
Setup & Use
IMPORTANT! Test sound reception of this monitor before first time
use and whenever you change location of transmitter (see page 6).
• Set transmitter channel switch to same channel as
receiver.
• Place transmitter in same room with child. Point microphone
directly toward cot or play area.
• Unwrap and fully extend power cord for best transmission. Plug
power cord into wall outlet. Use the power cord only in a wall
outlet. Do not plug the power cord into a ceiling outlet.
• Press transmitter power button to turn power on.
• Press night light on transmitter for a soft, glowing light. (Press
again to turn off night light.)
Adjust Channel
• Clip to your clothes to stay in touch with baby!
Hint: Under permitting conditions, the receiver receives sounds
up to 120 meters (400 feet) away from baby!
• Place receiver where you will see or hear it.
• Unwrap and fully extend AC adaptor cord for best reception. Insert
AC adaptor jack into receiver socket and plug into wall outlet. Use
the AC adaptor only in a wall outlet. Do not plug the AC adaptor
into a celing outlet.
Note: To use batteries as a power source, refer to instructions on page 5.
• Rotate receiver on/off/volume dial to turn power on. Power
indicator lights. Rotate on/off/volume dial to adjust volume.