Filter
Top Products
Assembly
8
•Tip the assembly so that
the back of seat is flat
on the floor and the front
and back bases are
facing up.
• Insert and “snap” the peg
on a wheel into each of
the four holes in the front
and back bases.
• Lift the assembly upright.
•From the front of the assembly, place the pad onto the seat.
• Lift the bottom of the pad. Insert the two elastic loops on
the pad through the holes in the seat bottom.
•From the back and bottom of the seat, hook the elastic
loops to the tabs on the seat.
15
Wheels
Front Base
Holes
Back Base
Holes
Hole
Wheels
Wheel
Peg
Bottom View
Pad
Hole
Hole
Elastic Loops
16
Tabs
Elastic Loops
Back and
Bottom View
Hint: To remove the wheels from the front and back base,
simply pull and remove. Store the wheels in a safe place for
future use.