Filter
Top Products
Operation & Use
9
To tighten the waist belts:
• Feed the anchored end of the waist belt up through the
buckle to form a loop .
• Pull the free end of the waist belt .
• Repeat this procedure to tighten the other waist belt.
To loosen the waist belts:
• Feed the free end of the waist belt up through the buckle to
form a loop .
• Enlarge the loop by pulling on the end of the loop toward
the buckle.
• Pull the anchored end of the waist belt to shorten the free
end of the waist belt .
• Repeat this procedure to loosen the other waist belt.
Note: After adjusting the waist belts to fit your child, make
sure you pull on them to be sure they are securely fastened.
B
B
6
Tighten Loosen
B
Anchored
End
Free End
Anchored
End
Buckle
Free End
Buckle
B
• Place your baby in the bassinet.
• Position the restraint pad between your baby's legs.
• Fasten both waist belts to the buckles on each side of the
restraint pad. Make sure you hear a "click" on both sides.
• Check to be sure the restraint is securely attached by pulling
it away from your baby.The restraint should remain
attached.
• Attach the toys to the canopy straps.
5
Waist
Belt
Waist
Belt
Restraint
Pad
Toys
When Putting Baby to Sleep*
• NEVER place any covering higher than an infant’s
shoulders.
• NEVER place infants to sleep on pillows, sofa cush-
ions, adult beds, waterbeds, beanbags, or any other
surface not specifically designed for infant sleep.
• Do not overdress your baby. If you feel comfortable,
your baby will too.
*This important safety message is brought to you by the Juvenile
Products Manufacturers Association.