Filter
Top Products
Loosen
To tighten the restraint:
• Feed the anchored end of the belt up through the buckle to
form a loop Ạ.
• Pull the free end of the belt ạ.
• Repeat this procedure to tighten the other belt.
To loosen the restraint:
• Feed the free end of the belt up through the buckle to form a
loop Ạ. Enlarge the loop by pulling on the end of the loop
toward the buckle.
• Pull the anchored end of the belt to shorten the free end of
the belt ạ.
• Repeat this procedure to loosen the other belt.
Please Note: After adjusting the belts to fit your child,make sure
you pull on the restraint to be sure it is securely fastened.
Set-up & Use
Anchored End
Free End
Buckle
Anchored End
Buckle
Free End
2
Tighten
12
ạ
ạ
Ạ
Ạ
3
Calming Vibrations
• Make sure your child is properly secured in the seat.
• To turn vibrations on, slide the power switch on the soothing unit
to the on position
•
.
• To turn vibrations off,slide the power switch on the soothing unit
to the off position
°
.
IMPORTANT! If vibrations from the soothing unit become faint,or if
there are no vibrations, remove the battery from the soothing unit
and dispose of it properly. Replace the battery with a new “D”(LR20)
alkaline battery.