Filter
Top Products
• Place the base upside down on a flat surface.
• Fit the wheel assembly onto the pegs on the base,
as shown
• Insert four #8 x
1
/
2
" (1,3 cm) screws through the holes in
the wheel assembly and into the pegs on the base.
Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
Wheel
Assembly
• Insert and “snap” the caster wheels into the base,
as shown. This may require some force.
• Turn the base over.
1
2
3
Assembly
Caster
Wheels
Base
CAUTION
This product contains small parts in
its unassembled state.
Adult assembly is required.
Bottom View
Bottom View
Pegs
Pegs