Filter
Top Products
• Fit the large peg on the tee into the
large hole in the collar.
• Insert the small peg on the tee into
the small hole in the collar.
• Pull up on the tee to be sure it
is secure.
IMPORTANT! As a precaution, the
tee has been designed to release
from the base if stressed. If the tee
releases from the base, simply
reattach it following assembly steps
and .
Assembly
Base
Collar
• Position the base right side up.
• Insert and snap the three tabs on the
collar into the three slots in the base.
IMPORTANT! Assembling the collar
to the base is a one-time assembly.
Please be sure all three tabs on the
collar are inserted into the base slots.
Small Peg
Tee
• Using your hand or foot, press the
foot pedal down to the set position.
1
2
3
3
Tabs
Foot Pedal
Small Hole
Large Peg
Large Hole
Collar
Slots
2
3
72818b-0920 10/25/01 5:16 PM Page 3