Filter
Top Products
• Snap the frame cover (wider side facing forward) on the
underside of the frame.
• Insert the fork post through the frame hole making sure the
pointed end of the fender faces forward.
• Fit the handlebar onto the fork post.
• Place the key console on the center of the handlebar, so
that the key faces the rear.
• Align the key console holes with the handlebar holes and
insert two 1
1
/4
"
screws through the front and back of the key
console. Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
Pointed End
Wider Side
Faces Forward
6
Assembly
Frame Cover
Frame
Fork Post
Frame
Fork Post
Handlebar
Key Console
Handlebar