Filter
Top Products
Testing Sound Reception
5
Test transmitter transmission and
remote control receiver reception.
Place transmitter in room in which
you intend to use it.Rotate transmit-
ter power/volume dial to turn power
on.Turn on a radio.
Place remote control receiver in
room in which you intend to use it.
Rotate power/volume dial to turn
power on.Adjust remote control
receiver location.
• Variable light display lights when
sound is received by remote
control receiver:
- One or two dots light for
shallow sounds.
- Three or more dots light for
louder sounds.
• If you experience interference
(buzzing or static,etc.) while using
one channel setting,switch both
units to other channel.Selecting
a channel is usually a one time
adjustment.
Hint: All four dots in remote control receiver variable light display light:
- If you turn remote control receiver power on before transmitter power.You will
also hear static noise.Turn volume down and turn transmitter power on.
- If the remote control receiver is too far away from the transmitter.Move the remote
control receiver closer to the transmitter.
- If loud sounds are transmitting.
Power
Indicator
Power/Volume Dial
Power
Indicator
Power/Volume
Dial
Adjust
Channel
BUZZZZ
STATIC