Filter
Top Products
10
Operating Menus
This chapter provides information about the menu screens. The screens are used to
control the various functions of the Family Monitor. The user selects options from a
series of menus and executes the actions by using the keypad on the receiver.
MAIN MENU OPERATION
The Main Menu is displayed when the menu button is pressed under view mode. Use
this menu to access:
" System Setup - Selection allows user to set the system time and reset
system to factory default.
" Camera Setup - Selection allows user to turn cameras on and off
individually and set the scan duration time or to set camera viewing to
Quad mode.
" Pairing - Selection allows user to pair (sync) each camera with the
receiver.
" Power Saving - Selection allows user to save power by powering down
system after 2 - minutes of non-activity.
" VOX Setting - Selection allows user to activate recording based on sound
that initiated near the camera location (s).
" Brightness - Selection allows user to increase or decrease the brightness
of camera and receiver screens.
" Alarm Setup - Selection allows user to set alarms at the receiver when
voice recording (VOX) is activated, camera battery is low or when receiver
and camera(s) are out of range.
" Playback - Selection allows user to play back selected recorded video.
" SD Card Format - Selection allows user to format the SD card.