Filter
Top Products
illustration 8
illustration 9 illustration 10
bridge.
Pull the string up over the nut towards the headstock and feed it through the hole in the tuning machine capstan, (Fig-
ure 9) Bring the string back and over the capstan, loop it under itself, and pull it so that it is heading in toward the end of
the headstock, (Figure 10). While holding the string in place with your right hand, begin winding the button to remove
the slack in the string. Continue winding to form a neat coil with the initial wrap at the inside of the coil. Do not overlap
the winds.
Finally, tune the string to the appropriate pitch. Pull up gently at the center point of the string to stretch it. Retune, and
repeat, until unwanted slack is eliminated and the tuning of the strings is stabilized.
24
Set-up