Filter
Top Products
32
C
ongratulations on your purchase of Excalibur
Electronics’ Vibrating Pinball!
To get the
most fun from your new game, please read
this operating manual thoroughly, paying special
attention to safety and care instructions.
Installing Batteries
Your game requires 2 AAbat-
teries (not included). To in-
stall the batteries, carefully
turn the game over so that the
top side is face-down on a
soft surface. Use a small
Phillips screwdriver to
remove the screw. Lift off the
battery compartment lid.
Install the 2 AA batteries,
making sure to match the
polarity (+ and -) with the
diagram inside the battery
compartment. Place the bat-
tery compartment lid’s tabs in
their slots and snap the com-
partment door back on.
Replace the screw and gently
tighten it.
Your Vibrating Pinball buttons
are easy to use.
LEFT FLIPPER Press to activate
your left flipper when playing
pinball. Also press this button to
select Game 1 or Game 2.
RIGHT FLIPPER Press this to acti-
vate your right flipper when play-
ing pinball. Also, press and hold
it to eject a ball, or press to select
a level before starting a game.
PLUNGER Pull and release to put
a ball in play.
START Press to start a game.
ON Press to turn your game on.
RESET Press to reset your game.
PAUSE Press to pause during a
game, or to resume a game.
SOUND Press to turn the sound on
or off.
Layout of Vibrating Pinball
Flip-up scoreboard
Pinball
LCD
STAR
ON
PAUS
RESET
SOUND
RIGHT
FLIPPER
PLUNGER
LEFT
FLIPPER
Score
LCD
Flashing
Lights