Filter
Top Products
1. Remove contents from box: 8 large frame screws
and bolts, 4 seat screws, 4 backrest screws, 2 arm
frames, a footrest frame, and a seat frame.
2. Using screws and nuts marked “A” attach footrest
to arm frame by inserting screw from the ouside
of frame. Secure using one of the nuts. Tighten
using a phillips head screwdriver and wrench. Be
sure that the front of the armrest corresponds to
the front of the footrest (Figure 1).
3. Attach seat frame to arm frame using screws and
bolts marked “A”. Tighten using a phillips head
screwdriver and wrench. (Figure1).
4. Attach second arm frame section to footrest
frame and seat frame using the same process.
(Figure 2)
5. Attach padded seat to seat frame using screws
marked “B” and the large diameter allen key.
Note: the seat is the square padded piece.
(Figure 3)
6. Attach padded backrest to frame using the
screws marked “C” and the small allen key.
(Figure 4)
Note: the backrest is the slightly tapered piece. It
should be placed on the frame so the smaller side
is at the top.
7. Make sure all screws are tightened before use.
assembly instructions
A
C
B
figure 1
figure 2
figure 3
figure 4