Filter
Top Products
Quad Noise Gate
1074
dbx engineers are constantly working to improve the quality of our products. Specifications are, therefore subject to change without notice.
FOR MORE INFORMATION CONTACT:
dbx Professional Products
8760 S. Sandy Pkwy.
Sandy, Utah 84070
Phone (801) 568-7660
Fax (801) 568-7662
customer@dbxpro.com
http://www.dbxpro.com
A Harman International Company
Input
Connectors: XLR (Pin 2 and tip hot)
Type: Electronically balanced/unbalanced, RF filtered
Impedance: Balanced > 50 kOhm, unbalanced >25 kOhm
Max Input Level: > +22 dBu balanced or unbalanced
CMRR: 40dB:Typically >55 dB at 1 kHz
Key Input: Electronically balanced/unbalanced, RF filtered Balanced 50 kOhm, unbalanced >25
kOhm
Output
Connectors: XLR (Pin 2 hot)
Type: Servo-balanced/unbalanced, RF filtered
Impedance: Balanced 60 Ohm, unbalanced 30 Ohm
Max Output Level: > +22 dBm balanced, > +20 dBm unbalanced
System Performance
Bandwidth: 20 Hz to 20 kHz, +0/-0.5 dB
Frequency Response: 0.35 Hz to 200 kHz, +0/-3 dB
Noise: < -96 dBu, unweighted, 22 kHz measurement bandwidth
Dynamic Range: > 115 dB, unweighted
THD+Noise: 0.008% typical at +4 dBu, 1 kHz unity gain
0.08% typical at +20 dBu, 1 kHz, unity gain
< 0.1% any amount of compression up to 40 dB, 1 kHz
Interchannel Crosstalk: < -80 dB 20 Hz to 20 kHz
Stereo Coupling: True RMS Power Summing
Power Supply
Operating Voltage: 100-120 VAC 50-60 Hz or 200-240 VAC 50/60 Hz
Power Consumption: 30 Watts
Fuse: 100-120 VAC:300 mA Slow Blow
200-240 VAC: 160 mA Type T
Mains Connection: IEC receptacle
Physical
Dimensions: 1.75"Hx19"Wx9"D (4.4cmx48.3cmx20.1cm)
Weight: 6.9 lbs.
Shipping Weight: 9.3 lbs.