Filter
Top Products
Step 5: Reattach Covers
7a.
7b.
8.
Ensure belt does not get caught
underneath plastic cover.
Reattach plastic cover and press
down to snap in place as shown.
Repeat steps 2 through 7b on the
opposite side of child restraint.
Route buckle and adjuster strap
through fabric cover and reattach.
Once both springs have been
installed, place green inspected by
label on the lower left hand side
of the car seat as shown. This will
conrm that your seat has been
remedied.
*The addition of this spring will cause the attachment and removal of the child
restraint to the base and stroller to require slightly more force.
CCTR-932
-4-