Combi Baby Carrier Baby Carrier User Manual


  Open as PDF
of 4
 
Retrofit Kit Instruction Manual
*Make sure you have all the parts pictured above before using your child
restraint. If any parts are missing, call Consumer Affairs at 1-800-992-6624.
Step 1: Remove Fabric and Plastic Covers Step 2: Remove Screw and Washer
3b.
1b.
2.
Models Aected
Combi Centre, Centre ARB, Shuttle
and associated Travel Systems con-
taining the Centre and Shuttle.
Model numbers aected are:
8065, 8074, 8086, 8087 and 8520
and associated Travel Systems
containing the Centre and Shuttle
(Model #4400, 4515, 4520)
Child restraints manufactured prior
to 12/15/2007 are aected by this
recall.
For questions concerning installation please see our
instructional video at the following link:
www.combi-intl.com/retrofit_kit.html
1a.
3a.
While holding back plastic cover,
use phillips-head screwdriver
to remove screw and washer as
shown in gure 3b.
Slide wrench tool under-
neath lower end of plastic
cover to pop open.
*Color of spring may vary.*Phillips-head screwdriver
not included.
Wrench Tool
Spring Spring
Inspection
Sticker
-1-
Right
Left
Step 3: Assemble Spring
4.
Place screw and washer
into spring loop.
Detach foot-end of fabric cover from shell by unsnapping
and removing adjuster strap and buckle from cover.
Fold cover back as shown in figure 1b to expose the
plastic covers on the left and right.
next