Combi 9810 High Chair User Manual


 
- 5 -
Attaching the Canopy
Attaching the Canopy
1. Confirm the canopy is facing in the proper direction.
2. To attach the canopy place the pins in the clamps of the
canopy holders into the holes on the sides of the backrest.
Note: Clamp must be turned to be positioned behind the can-
opy holder in order to insert into the frame.
Using the Canopy
Open the canopy by pulling on the visor with one hand until
fully opened.
Removing the Canopy
Grasp the canopy holders on each side, one at a time, and pull
out from the frame.
CAUTION
Failure to fully secure the canopy holders can cause
the holders to bend. When storing the high chair by
laying it down, be sure the canopy is off the ground
to prevent it from bending.
Deluxe Easy Glider 9850 Series
Additional Instructions
Using the Gliding Feature
1. Always lock the front wheels. Keep wheels locked.
2. Adjust the reclining position to the appropriate position
for your child’s age and strength.
3. Slide the left and right glide lock levers into glide position. Use a smooth and
gentle motion never a hard push.
4. To lock the glide feature slide the glide lock levers into the lock position.
WARNING
Never push the high chair like a swing.
It may fall over and cause your child to
fall out.
CAUTION
The gliding feature can be used in any
recline position up to a maximum of 22 lbs.
Always watch your child when using the
glide. Immediately stop if you sense some-
thing is wrong.
Check to make sure obstacles are not within
its gliding path.