Filter
Top Products
Opening the Stroller
Front Wheel and Footrest Assembly
1. Before opening,
fully extend the
handle by pushing
handle adjuster
buttons and
rotating the handle
to upright position.
2. Pull the lock lever
out to release the
stroller.
3. Lift the handle and snap the stroller away from
you. It will open and automatically lock into
position.
1. Lean stroller back and slide the footrest
onto the two front stroller legs (figure A)
until both upper pins snap in place (figure
B). Pull down on footrest to ensure it is
secure.
2. With footrest in place, slide wheels onto
the two front stroller legs until both lower
pins snap in place (figure C). Pull down on
wheel to ensure it is secure.
Removing the front wheel and footrest:
1. Press in the two lower pins that secure the
front wheel while sliding the wheel off of
the stroller leg (figure D).
2. Press in the two upper pins holding the
footrest while sliding the footrest off of the
stroller leg (figure E).
Figure A
Figure B
Figure C Figure D Figure E
- 3 -
Lower Pins
Upper Pins
Upper Pins