Combi 7100 Series Stroller User Manual


 
2
1
4
2
1
4
2
1
4
1
2
Unlocked
Locked
1. Slide indicator to right so that red label is
visible.
2. Press and hold release button while lifting
handle up and snap stroller away from you.
3. Release button can not be pressed if red
label on indicator is not visible.
4. Before use, ensure stroller locking mecha-
nism is in locked position.
Opening the Stroller
1. Pull seat release lever.
2. While pulling release lever place opposite hand behind
seat back and lift seat with both hands.
3. Rotate seat.
4. Center armrest above red arrow labels and press seat
into stroller.
5. You will hear an audible “click” once seat is locked into
position.
6. Pull up on seat to ensure that it is locked into position.
Do not use seat from stroller to carry child.
Always remove child before detaching or reattaching stroller seat.
Changing Seat Direction
Rear Facing Seat
Forward Facing Seat
Note: Illustrations are only representative and not actual.