Filter
Top Products
- 6 -
Using the Basket
Using the Stroller Pack
CAUTION
Do not place more than 10 lbs. in either basket. Remove
all items from the basket before folding the stroller.
Removing
Unfasten clips on front
and side of basket.
CAUTION
To avoid burns, do not put bottles/cups with
hot liquids in the stroller pack. Do not place
more than 2 lbs. in the stroller pack. Remove
bottles before folding the stroller.
1. Wrap the side velcro
straps tightly around
the handle tube
above the Folding
Lever.
2. Wrap the straps
over the handle top
and fasten the clips
together.
Can be used on either side of the handle
(left or right).
Velcro
Folding
Lever
Stroller Pack
Clips
Removing & Attaching the Front Swivel Wheels
Place front swivel wheel
assembly on the swivel
shaft. The assembly is
secure when it locks onto
the shaft.
Removing the Swivel Wheels
Press in the square button
located at the bottom of the
wheel holder while pulling the
assembly off of the swivel
shaft.
Release Button
Attaching
Reverse the procedures for
Removing
.
Removing/Attaching the Seat Cushion
CAUTION
If seat cushion is ripped or torn,
do not use.
Do not use the stroller without
the seat cushion.
Removing
1. Press levers down on
right and left harness
hooks to detach hooks
from buckle tongues.
2. Press buckle button
down (with Combi logo)
and detach buckle
tongues from buckle.
3. Remove shoulder pads
from harness by pulling
over harness
hooks.
Attaching
1. Attach Velcro at the bottom
of the seat pad to Velcro on
the stroller base.
2. Pull top of seat pad forward;
the seat pad can rest on the
front guard rail.
3. Insert buckle strap into slot at
the bottom back of the seat
pad.
4. Pull top of seat pad forward to
detach Velcro..
5. Pull all the harness straps
through the top and side slots in
cover.
6. Unzip zipper at the base of the
seat cover.
7. Pull bottom of seat pad upward
to detach Velcro
4. Locate zipper on the back
of the seat pad and locate
the zipper in the seat bite
of the stroller. (The boot
also has a zipper; do not
use the boot zipper to
attach the cover)
Zip seat pad to stroller.
5. Insert harness straps with
hooks and harness straps
with buckle tongues thru
slots on back of seat pad.
6. Attach Velcro on top of seat
pad to stroller.
Seat Base
Velcro