Filter
Top Products
EN Techno Strobe™ 168 QRG
3
Product
Description
The Techno Strobe™ 168 is a
lightweight LED strobe light with very low
power consumption and built-in speed and intensity settings.
Perfect for
special events and the mobile entertainer, the Techno Strobe™ 168 can be
operated in standalone or DMX modes and can strobe all night.
Product Overview
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
Power Linking
You can link up to 34 Techno Strobe™ 168 products at 120 VAC and 57
units at 230 VAC.
Fuse Replacement
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
DIP Switches
Automatic and standalone modes can be accessed without DMX through
the DIP switches located on the back panel. If you are unfamiliar with DIP
switches, download the DMX Primer from www.chauvetlighting.com.
All-On
Operation
Due to its innovate design, this unit can be run strobing all night, but
continuous All-On operation should not be used for more than 30 minutes
at 120V or 15 minutes at 230V.
Back Panel View
Power In
Fuse Holder
DIP Switches
DMX In/Out
Power Out
Intensity
Adjustment
Speed
Adjustment