Filter
Top Products
7
4.2 Assembly and folding up
Assembling the Ready Chassis
Push down the axle socket with your left hand, and at the same
time push up the left frame tube using your right hand. Then
pull the short lower side tube backwards with your left hand,
pressing against it from above with your right hand. Repeat this
procedure on the right-hand side.
When pulling the short lower side tube backwards, the
auto-lock disk must audibly engage in each case.
Auto-lock disk
The assembly of the CX requires particular attention. Care
needs to be taken here that the brake cable (see Section 3.10)
is not bent or damaged in some other way. It must run along the
frame tubes as illustrated.
DANGER
Take care not to bend the brake cable which connects the
handlebar with the passenger compartment on the CX. This
might reduce the braking effect, or the brake may not even
continue to function.
DANGER
Before each journey make sure that both auto-lock disks
are engaged. If this does not happen, the passenger com-
partment may collapse unintentionally and injure your child
and/or cause you to lose control of the carrier.