Filter
Top Products
B. Securing Your Child in the Carrier
1. Seat your child into the Baby Supporter and snugly secure the lap belt around their waist. Then
snugly secure the shoulder harness and crotch strap (refer to your carrier owner’s manual for proper
seatbelts use).
2. Adjust head support so that your child’s head is cupped in the head support. To adjust the head
support, slide the head support along the carrier straps. See Figure 6.
C. Using a bicycle trailer with the Baby Supporter
Note: When using the Baby Supporter in a bicycle trailer, remove the upper head support section, as it
may interfere with your child’s helmet.
1. To remove the head support, detach the straps located on the backside of the head support and
remove.
Warning: Always secure your carrier’s seatbelt system around the occupant when using the
Baby Supporter. Failure to properly attach seatbelts could result in serious injury or
death to occupant(s) in the event of an accident. Please refer to the owner’s manual
for proper seatbelt use.