1 Remove bassinet from
Playard/Crib.
2 Remove floorboard from
bassinet.
3 Press release buttons on each
hook and push hook into
larger tube.
4 Rotate hooks to center of
bassinet.
5 Fold bassinet.
6 Place bassinet in pocket of travel bag.
IMPORTANT: If continuing to use Playard/Crib,
be sure to properly secure floorboard in Playard/Crib.
6
FOLDING and STORING
Bassinet
1
To remove floorboard:
• Unfasten attachment straps.
• Remove floorboard and set
aside.
2 To unlock and raise floor:
• Push down on center of
Playard/Crib floor.
• Lift Floor Handle and
rotate in direction of
arrow (counterclockwise).
• Pull up on Floor Handle
to raise floor.
Raise approximately
45.7 cm (18 inches).
3 To fold top rails:
• Pull up on top rail slightly.
• Squeeze Release Button
on bottom of top rail and
push rail down. (Release
buttons are identified by
printed arrows.)
Repeat for other sides.
NOTE:
• If rails are difficult to
unlock, raise center of
floor higher and
squeeze Release
Button again.
• If only one side of rail
folds, squeeze Release
Button again to fully
fold.
Playard/Crib
Release
Button
Floor
Handle