Filter
Top Products
OPERATIONS and ADJUSTMENTS (continued)
Changing Harness Strap Slots:
MUST use slots at or just above shoulders.
A Loosen harness straps.
B Remove both harness strap loops from
Splitter Plate on back of car seat (fig. e).
C Change harness strap slots.
Make sure harness straps are threaded
through matching slot of seat pad and
car seat.
It may be necessary to remove seat pad
from top of car seat.
D Put right strap loop on Splitter Plate first,
then attach left strap loop. (fig. e).
NOTE: Make sure straps are NOT twisted.
5
(fig. e)
Splitter Plate
18