Filter
Top Products
20
Changing Harness Strap Slots:
6
OPERATIONS and ADJUSTMENTS (continued)
7
The harness straps must go into the slots
even with or just above the shoulders.
A To adjust harness straps:
Remove straps from harness plate
and adjuster bar (fig. a).
B Pull strap ends through slots and reinsert
them in the correct slots (fig. b).
C Reassemble straps onto adjuster bar
exactly as shown (fig. c).
D Push adjuster bar down (fig. d).
E Rotate lock down (fig. e).
NOTE:
•Make sure both harness straps are
securely attached within Harness Plate
and Adjuster bar and locked into place
with Harness Lock.
•Make sure straps are NOT twisted.
Overhead Shield Adjustment (fig. f):
•To adjust: Press both buttons down and
move shield to desired position closest to
child. Release buttons to lock shield into
place. Check by pulling out on shield.
NOTE: Shield does not need to contact
child when in closest position; harness
system restrains child.