12
Overhead Shield Adjustment (fig. e):
• To adjust: Press both buttons down and
move shield to desired position closest to
child. Release buttons to lock shield into
place. Check by pulling out on shield.
NOTE: Shield does not need to contact
child when in closest position; harness
system restrains child.
Changing Harness Strap Slots:
A Loosen harness straps:
Lift adjuster lever and pull
harness straps out (see ).
B Remove both harness strap loops from
Splitter Plate on back of car seat.
C Change harness strap slots.
Make sure harness straps are threaded
through matching slot of seat pad and
car seat.
It may be necessary to remove seat pad
from top of car seat.
D Re-attach harness strap loops to Splitter
Plate:
Slide each harness strap loop onto
Splitter Plate.
NOTE:
• Make sure both strap loops are securely
attached within Splitter Plate hook.
• Make sure straps are NOT twisted and
are routed behind stand (fig. f).
6
OPERATIONS and ADJUSTMENTS (continued)
7
1