Filter
Top Products
Controlling the Keyboard Sounds
EN-16
5.
Pressing
co
again to unsplit the keyboard (so it
plays only the tone you selected in step 1).
• Each press of
co
toggles between split (two tones) and
unsplit (one tone).
• If you turn on both layer and split, layering will be applied to
the right side range of the keyboard only.
1.
While holding down
co
, press the keyboard key
where you want the split point to be.
The key you press will become the lowest note of the right
side range of the split keyboard.
The VIRTUAL HALL function lets you instantly configure the
Digital Keyboard to play with the acoustic effect of a classic
concert hall.
1.
Press
3
(VIRTUAL HALL) to turn on the
VIRTUAL HALL function.
2.
To turn off the VIRTUAL HALL function, press
3
again.
• The reverb setting turns off automatically whenever the
VIRTUAL HALL function is turned on. When you turn
off the VIRTUAL HALL function, the reverb setting will
return to whatever it was before you turned on the
VIRTUAL HALL function.
Reverb adds reverberation to notes. You can change the
duration of the reverb.
1.
Press
ct
(FUNCTION) and then use the
br
(10-key) [4] (o) and [6] (p) keys to display
“Reverb” (page EN-7).
2.
Use the
br
(10-key) [–] and [+] keys to select
the reverb setting you want.
• Changing the reverb setting (including turning it off)
while the VIRTUAL HALL function is turned on will turn
off the VIRTUAL HALL function.
To change the split point
Example:Setting middle C (C4) as the split point.
Using VIRTUAL HALL
C4
Key name
Lights
The indicator will disappear when the VIRTUAL HALL function is
turned off.
Using Reverb
Off (oFF) Turns off reverb.
1 to 10 The larger the number selected, the longer
the reverb duration.
Reverb
Indicator disappears when reverb is turned off.
CTK4400_A5_x1a_EN_ES.indd 18 2014/02/19 10:25:14