Filter
Top Products
Using the Pattern Sequencer
E-120
1.
While the pattern sequencer screen is
displayed, hold down the R-13 (FUNCTION)
button and press the C-5 (EDIT) button to
display the edit menu.
2.
Use the R-17 (t, y) buttons to move the 0 to
“ElementEdit” and then press the R-16 (ENTER)
button.
• This displays the “ElementEdit” screen.
3.
The 0 should be next to “Clear”, so press the
R-16 (ENTER) button.
• This displays the “Clear Element” screen.
4.
Use the R-17 (u, i) buttons to specify the
accompaniment pattern you want to clear and
then press the R-16 (ENTER) button.
5.
In response to the “Sure?” message that
appears, press the R-14 (YES) button to clear or
the R-14 (NO) button to cancel.
• Pressing the R-14 (YES) button changes the status of
all the instrument parts of the accompaniment pattern
you specified in step 4 to “Empty”.
• This procedure can be performed only when the status
of all of the instrument parts of the accompaniment
pattern is “Empty”.
1.
While the pattern sequencer screen is
displayed, hold down the R-13 (FUNCTION)
button and press the C-5 (EDIT) button to
display the edit menu.
2.
Use the R-17 (t, y) buttons to move the 0 to
“ElementEdit” and then press the R-16 (ENTER)
button.
• This displays the “ElementEdit” screen.
3.
Use the R-17 (t, y) buttons to select one of
the items described in the table below and then
use the dial or R-14 (–, +) buttons to change the
setting.
4.
After the settings are the way you want, press
the R-15 (EXIT) button twice to return to the
pattern sequencer screen.
1.
While the pattern sequencer screen is
displayed, hold down the R-13 (FUNCTION)
button and press the C-5 (EDIT) button to
display the edit menu.
2.
Use the R-17 (t, y) buttons to move the 0 to
“AllEdit” and then press the R-16 (ENTER)
button.
• This displays the “All Edit” screen.
3.
The 0 should be next to “Clear”, so press the
R-16 (ENTER) button.
4.
In response to the “Sure?” message that
appears, press the R-14 (YES) button to clear or
the R-14 (NO) button to cancel.
• Pressing the R-14 (YES) button changes the status of
all the instrument parts of all the accompaniment
patterns to “Empty”.
Accompaniment Pattern and
Rhythm Operations
To clear all instrument part rec areas
included in an accompaniment pattern
To configure the accompaniment pattern
number of measure and beat settings
Display: Item name Setting Range
Measure:
Number of measures
INTRO, ENDING: 01 to 16
NORMAL, VARIATION: 01 to 16
NORMAL FILL-IN, VARIATION
FILL-IN: 01 to 02
Beat: Beat 2/4 to 4/4 to 8/4, 2/8 to 16/8
To clear all rec areas included in the
currently selected rhythm
CTK7200_e.book 120 ページ ２０１４年３月７日 金曜日 午後３時４分