Casio CTK-2300 Musical Toy Instrument User Manual


 
Controlling the Keyboard Sounds
E-14
Short Sampling
With short sampling, you can sample up to three sounds,
each one with a duration of approximately 0.3 seconds. You
can sound the short sampled sounds using voice pads
1 through 3.
1.
Connect an external device to the Digital
Keyboard.
Refer to steps 1 through 2 under “Full Sampling” (page
E-13).
2.
While holding down
4
, press the voice pad
(
br
,
bs
, or
bt
) that corresponds to the tone
number where you want to store the sound.
The relationship between tone numbers and voice pads
is shown below.
Example: When voice pad 3 (Tone Number 404) is
selected
Record standby is entered when you release
4
.
3.
Output the sound from the external device.
Sampling starts automatically and stops after about 0.3
seconds.
Sampling will not start if the volume level of the external
device is too low.
4.
Try playing something on the keyboard.
You also can sound the sampled sound by pressing the
voice pad you pressed in step 2.
Sampling a new sound deletes the sound assigned to the
same tone number and the full sampling sound (page
E-13).
Selected Tone
Number
402 403 404
Pressed Voice Pad
Pad 1
(
br
)
Pad 2
(
bs
)
Pad 3
(
bt
)
Vo i . Pad3
Flashes
W
ai t ing
Flashes
Vo i . Pad3
Lights