Burley Stroller Kit Stroller User Manual


  Open as PDF
of 6
 
BURLEY STROLLER KIT OWNER’S INSTRUCTION AND SAFETY MANUAL
|
5
To Convert from Strolling to Trailering
1. Engage parking brake and tighten knob to secure stroller
wheel in “Bike” position. Figure 7
2. Line up rear tow bar hole with rear receptacle hole. Insert
retaining pin through both holes and lock retaining
hoop securely. Figure 8
3. Re-install the tow bar and hitch on the bike.
Maintenance
l
Lubricate stroller wheel assembly twice a year for normal
use, or monthly if used in wet or salty conditions.
l
Inspect handle, receivers, parking brake, and wheel monthly.
l
Contact Burley to replace any damaged parts.
WARNING! WHEN CONvERTINg THIS ATTACHMENT FOR TRAILERINg, MAKE SURE
THAT STROLLER WHEEL IS IN pROpER pOSITION BEFORE ATTACHINg
TRAILER TO YOUR BICYCLE. DO NOT USE THIS pRODUCT WITHOUT
RETAININg pIN AND SAFETY STRAp pROpERLY INSTALLED. FAILURE
TO FOLLOW THE INSTRUCTIONS IN THIS MANUAL AND YOUR TRAILER
MANUAL CAN CAUSE AN ACCIDENT RESULTINg IN SERIOUS INJURY.
 previous