Badger Basket 00369 Baby Carrier User Manual


  Open as PDF
of 3
 
1.0/0407/TG
STEP 1 - PICTURE 1: Assemble the rocker base using the TWO ROCKERS (A), ONE BAR
(B), and TWO SCREWS (C).
The countersunk holes on the rockers face out for the heads of the screws. The threaded inserts on
the bar face up for use in STEP 2.
STEP 2 - PICTURE 2: Attach the CRADLE BODY (D) to the BAR (B) using TWO BOLTS (E).
Insert the bolts through the cradle body and screw them into the threaded inserts on the bar.
STEP 3 - PICTURE 3: Dress the FABRIC LINER (F) onto the CRADLE BODY (D). Dress
the FABRIC SHEET (G) onto the MATTRESS PAD (H) and put them inside of the CRADLE
BODY (D).
The WICKER DOLL CRADLE is now assembled!
PICTURE 2PICTURE 1
B
A
D
E
PICTURE 3
Page 3 of 3
G, H
A
F
 previous