Filter
Top Products
1.0/0406Page 2 of 2
STEP 1: See PICTURE 1. Assemble the cradle base by attaching the TWO SIDE PANELS (A) to the UPPER SUPPORT
BAR (B) and the LOWER SUPPORT BAR (C) using a total of FOUR BOLTS (D).
STEP 2: See PICTURE 2. Attach the CRADLE BODY (E) to the UPPER SUPPORT BAR (B) using the predrilled holes,
TWO BOLTS (D), TWO WASHERS (F), and TWO T-NUTS (G).
Insert the bolts (with washers) through the holes on the cradle bottom, then insert them through the holes on the
upper support bar, and then secure the ends of the bolts in place on the underside of the support bar using the T-Nuts.
A
B
E
B
C
STEP 3: See PICTURE 3. Unfold the two metal supports inside of the cradle body and lock them in place by putting one
side behind the rubber stopper and the other side in front of the rubber stopper, as shown.
STEP 4: See PICTURE 4. Place the CRADLE MATTRESS WITH SHEET (H) inside of the cradle body. Next, secure the
hood in the open position by pressing on the hinge bars to lock into place.
Your DOLL CRADLE is now ready to enjoy!
This beautiful item is suitable for children from three years old and up. Please make sure children
know that this furniture is for dolls and stuffed animals only.
A
G
PICTURE 1
PICTURE 2
H
PICTURE 4
Hinge Bar
PICTURE 3
When play time is over, the hood hinge bars can be
released to collapse the hood; and the metal support
bars inside the cradle can be released to collapse the
cradle body for storage or travel.
Children should NEVER attempt to
sit or stand on the bed. It is NEVER
to be used with real infants or pets.