To adjust the position, squeeze the tray release handle
located underneath the tray and reposition the tray to the
desired position. (see Fig.5). Release tray release handle.
Check that the tray is securely locked in it’s new position.
The dishwasher safe food tray snaps onto the high chair
tray and is held in place by tabs on either side of the tray.
When installing the food tray make sure that it snaps into
place to prevent the child from removing the food tray. To
remove the food tray, carefully lift outward on the tabs on
each side.
RECLINE SEAT
Squeeze recline lever on back of the seat and adjust to
the preferred recline or upright position. (see Fig.6)
WARNING: It is recommended
that only children capable of sitting up-
right unassisted use the high chair in the
upright position.
WARNING: Prevent serious in-
jury or death from falls or sliding out. Al-
ways secure child in the restraint system,
either in the reclining, semi-reclining or
upright position.
TO USE SAFETY BELT
The tray is not designed to hold the child in the chair. Al-
ways keep child in view while in high chair. Never leave
child unattended.
Step 1.
Place your child’s arms through the loops formed by the
shoulder and waist straps. Place the crotch strap between
your child’s legs. Insert the harness buckles into the center
buckle to fasten.
Step 2.
Adjust shoulder and waist straps for your child’s comfort
and safety by sliding buckles in either direction. Safety
straps are to t snug around your child. (see Fig. 7)
TO RELEASE SAFETY BELT
Step 1.
Squeeze sides of buckles to release. (see Fig. 8)
Fig. 9
Fig. 6
Fig. 7
4
Fig. 8
4 positions
Squeeze up
to release
Squeeze up to release
Adjust for a
snug fit
6 positions