Filter
Top Products
CONTENTS (Fig. 1):
• 2 Long curved bars
• 2 Short bars with connector knobs
• 1 Changing area fabric
WARNING:
Avoid serious injury or death:
• Always use restraint belt to prevent falls
• Use changer with infant who’s weight is less
than 18 lbs (8.2 kg ) and is less than 25 inches
(63.5 cm) tall.
• Discontinue use of changer if infant can push
up on hands and knees or sit unassisted.
• DO NOT carry changer with infant in it.
• Always stay within arms reach of your child
when using the changing area.
WARNING: Strangulation Hazard
Child can lift the changing table and get
neck trapped between the changing table
frame and the play yard frame. Never leave
the changing table in place when the child is
in the bassinet or the play yard. Always flip
changer to the outside when not in use.
WARNING FALL HAZARD:
To prevent death or serious injury, always
keep child within arm’s reach.
ASSEMBLY
1. Connect the two Long Curved Bars together as shown in figure 2.
2. Insert the assembled Curved Bars into the Changing Area Fabric
such that the holes in the ends of the Curved Bars face downward
as shown in Figure 3.
3. Slide the Curved Bars around inside the sleeve of the Changing
Area Fabric.
4. Connect the Short Bars with Connector Knobs to the Curved
Bars as shown in figure 4. When assembling the Short Bars with
Connector Knobs make sure that the knobs will be facing inward
when assembled and the snap buttons are facing downward.
Figure 2
Figure 3
Figure 4.
TO ASSEMBLE CHANGING AREA
Figure 5.
Figure 1
Holes face
down
Completed assembly
Copyright © 2006 - 2007, Baby Trend Inc., All Rights Reserved.
8