Filter
Top Products
Figure 1
Figure 2
Figure 5
5
Figure 3
Figure 4
FOLDING PLAYARD
1. Undo the 6 Velcro straps holding mattress from underneath Playard
floor. (If mattress is not used in the bassinet). Remove mattress and set
aside.
2. Grasp the center floor lock handle pushing down . Rotate the handle
counter-clockwise about 90 degrees and lift upward until handle is as
high as the top rails. Gather the four feet of the playard together so that
they nearly touch each other. See figure 1 and 2.
NOTE: TOP RAILS OF THE PLAYARD ARE STILL IN THE
“LOCKED” POSITION.
3. Locate release button on the center of the bottom of each top rail. Lift
slightly while squeezing button until the rail clicks. Push down on rail
(while still holding release button in) until side forms a “U”. Repeat for
remaining sides (Fig. 3).
NOTE: If top rail(s) do not form the “U” completely do not force. Check
the floor of your Playard to make sure all bottom rails are unlocked and
pull up on middle handle of floor again. Repeat
step 3.
4. Pull up on handle in center of Playard (Fig. 4). Gather legs of Playard
together.
5. Wrap mattress around Playard frame with padded side facing in.
6. Secure the 3 Velcro straps by feeding through loops on end of mattress
and folding back onto itself (Fig. 5).
7. Place Playard in carry bag so handle comes through opening between
zippers and wheels come through opening in the end of bag.
WARNING: NEVER LEAVE INFANT IN
PRODUCT WITH SIDES DOWN.
Infant may roll into space between
pad and loose mesh side causing
suffocation.
Rotate before
lifiting