Filter
Top Products
4 5
• To install, gently slide the
wheel’s axle into the hole
in the axle end until you
hear it click into place.
• To remove, simply push in
the spring lock while
pulling out the wheel.
Rear Wheels
1 To install front wheel, lay
stroller back so handle is
resting on floor. Open the
calipers by flipping the
caliper lever toward the
rear wheels.
2 Insert the front wheel into
the fork tips by aligning
the axle flats with the
fork tip flats.
3 Tighten by turning the
wheel lever while holding
the opposite side.
4 Close the wheel lever
making sure that it is
facing toward the back
of the stroller.
5 Close caliper by flipping
the caliper lever toward
the fork tips.
Front Wheel
Caliper
Lever
Wheel
Lever
Spring
Lock
Spring
Lock
Performance Double (Assem) 12/16/04 4:08 PM Page 4