Atlona AT-LINE-PRO2 Building Set User Manual


 
Command Code Response Description
S PICTURE MODE 0-3 > PICTUREMODE STANDARD-
USER
0:STANDARD; 1 :MOVIE; 2:VIVID;
3:USER, PICTURE MODE OUTPUT
S CONTRAST 0-100 > CONTRAST 0-100 CONTRAST 0-100 ADJUST [Defaut:50]
S BRIGHTNESS 0-100 > BRIGHTNESS 0-100 BRIGHTNESS 0-100 ADJUST [Defaut:45]
S HUE 0-100 > HUE 0-100 HUE 0-100 ADJUST [Defaut:50]
S SATURATION 0-100 > SATURATION 0-100 SATURATION 0-100 ADJUST [Defaut:60]
S SHARPNESS 0-100 > SHARPNESS 0-100 SHARPNESS 0-100 ADJUST [Defaut:32]
S NR 0-3 > NR OFF-HIGH 0:OFF; l:LOW; 2:MIDDLE; 3:HIGH, NR CONTROL
S PCHPOSITION 0-100 > PCHPOSITION 0-100 H POSITION 0-100 ADJUST
S PCVPOSITION 0-100 > PCVPOSITION 0-100 V POSITION 0-100 ADJUST
S PCCLOCK 0-100 > PCCLOCK 0-100 PC MODE COLCK 0-100 ADJUST
S PCPHASE 0-63 > PCPHASE 0-63 PC MODE PHASE 0-63 ADJUST
S COLORTEMP 0-3 > COLORTEMP NORMAL-USER 0:NORMAL; 1:WARM; 2:COOL;
3:USER, COLOR TEMP SETTING
S RED 0-100 > RED 0-100 COLOR TEMP “RED” ADJUST [Defaut:47]
S GREEN 0-100 > GREEN 0-100 COLOR TEMP “GREEN” ADJUST [Defaut:47]
S BLUE 0-100 > BLUE 0-100 COLOR TEMP “BLUE” ADJUST [Defaut:47]
SOSDHPOSITION 0-100 > OSDHPOSITION 0-100 OSD H POSITION 0-100 ADJUST [Defaut:50]
S OSDVPOSITION 0-100 > OSDVPOSITION 0-100 OSD V POSITION 0-100 ADJUST [Defaut:50]
S OSDTIMEOUT 0-100 > OSDTIMEOUT 0-100 OSD TIMEOUT 0-100 SETTING [Defaut: 10]
S OSDBACKGROUND 0-8 > OSDBACKGROUND 0-8 OSD OSDBACKGROUND 0-8 ADJUST [Defaut:5]
S AUDIOMUTE 0-1 > AUDIOMUTE OFF-ON 0:OFF; 1 :ON, AUDIO MUTE CONTROL
S AUDIODELAY 0-3 > AUDIODELAY OFF-l 50MS 0:OFF; 1:40MS; 2:110MS; 3:150MS,
AUDIO DELAY SETTING
S RESET 1 > RESET ON RESET ACTION
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
9