Filter
Top Products
1
2
Heritage Bass Guitar Cabinets
SVT-410HLF / SVT-810E
7
SVT-410HLF Suggested Hookup Diagrams
In the first example, a speaker cable with 1/4” ends connects from one speaker output of the amplifier to the
speaker input of the Ampeg Heritage SVT-410HLF cabinet. An additional cabinet may be connected by
attaching another speaker cable from the remaining 1/4” speaker output of the amplifier to a speaker input of
the next cabinet.
The second example is not as common, but it also works. Plus, it is great for daisy-chaining multiple cabinets.
You may connect a speaker cable with 1/4” or Speakon
®
ends from one speaker output of the amplifier to the
speaker input of the Ampeg Heritage SVT-410HLF cabinet. An additional cabinet may be connected by attaching
another speaker cable from an open jack (thru) to the input jack of the next cabinet. Multiple cabinets may be
daisy-chained this way.
WARNING: Always use good quality (non-shielded) speaker cables. Never use (shielded) instrument cables to
connect speakers to an amplifier. Also, do not use both cable routes listed in example #2 above. Use one route
or the other, but not both!