Aiphone AI-SSV Musical Table User Manual


  Open as PDF
of 2
 
TOLL FREE TECHNICAL SUPPORT: (800) 692-0200
TOLL FREE FAX LINE: (800) 832-3765
E-MAIL: tech-serv@aiphone.com
AI-SSV Instr.
1206JD
SPECIFICATIONS:
Audio Power Source: Supplied by master station
Speaker: 625 ohms, 1W/25V, 2" diameter, water proof and puncture resistant, 2.4 oz. magnet
Call Button: SPST call button, momentary activation. Limited stop button
Call Annunciation: Call tone rings at master for duration set in programming of system.
Communication: Hands free at sub. Master is push-to-talk, release-to-listen, or VOX via handset.
Video Output: 75 Ohm / 1Vp-p composite video
Iris Control: Auto
Minimum Illumination: 1.0 lux
Effective Picture Element: 512x492 NTSC
Lens Mount 3.7mm Cone Pinhole Lens
Camera Power Source: 12V DC, 100mA (via included power supply)
MTBF: (Mean Time Before Failure) 80,000 Hours
Faceplate: 12 gauge stainless steel
Mounting: Flush mount into a 2-gang box (minimum 2-½” depth) or surface mount into SBX-2G (sold separately)
Tamper proof screws included (6x32 for use with flush 2-gang box) with T-10 TORX bit
When using SBX-2G, use the hardware included with that unit.
Terminations: Color-coded pre-wired pigtails. Orange, Brown and Black wires connect to AI-900RS connector.
Red connector = 12V DC power; Yellow connector = 75 Ohm / 1Vp-p video output (BNC).
Operating Temperature: 14
F ~ 140°F (-10°C ~ 60°C)
Audio Wiring: 2 conductors w/overall shield. Use Aiphone #822202 wire.
Audio Wiring Distance: 1650' (24AWG); 2650' (22AWG);
Video Wiring: Independent BNC connection from sub station pigtail to destination video device.
Dimensions (H x W x D): AI-SSV alone: 4-11/16" x 4-11/16" x 2"
With SBX-2G: 4-3/4" x 4-7/8" x 3-5/8" (Top) 2-3/8" (Bottom)
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) 455-0510
FAX (425) 455-0071
Camera
Call Button
Yellow BNC connector for
video output
Speaker
AI-SSV BACK VIEW & WIRING DIAGRAM:
Wiring to AI-900RS via supplied connector:
Orange:A (top)
Brown: B (middle)
Black: C (bottom)
Top View
Of Connector
Red connector for 12V DC camera
power input (from included power supply)
Power supply dimensions:
1-⅝" W x 2-¼” H x 1-⅝” D
6' DC cord.
 previous