Filter
Top Products
4
SETUP
Install or Replace Battery
1. Remove the battery compartment cover.
2. Pull the plastic tab below the battery (if applicable) to remove it and discard
the tab.
3. Insert 1 x 3V CR2032 lithium battery into the battery compartment, as
shown. Follow the polarity (+/-) diagram in the battery compartment.
4. Replace the battery cover.
Set the Measurement Units
While you are weighing an item, press the Unit Conversion button, located
on the bottom of the scale, to toggle between grams/milliliters (g/ml) and
pounds/ounces (lb/ oz).
3
Install Battery
1 x 3V CR2032
lithium battery
Remove
Battery Cover
1
Remove
Plastic Tab
2
CR2032
+
CR2032
+